Search results

Thanks for the advice. My initial concerns were wear on pump and oveflow cylinder getting clogged. Does not look like a huge issue when needed in a pinch, but I like the idea of building a pen or PVC holding net if this will be a consistent need.

Snagged bunker the the night before I expect to fish with them. I am concerned about leaving my boat for the night and leaving the live well on all night to keep them alive. I have shore power. Am I being to cautious worring about having the pump run all night while I am not on the boat? I...

Any Yamaha dealer will have or can order. Approx $75- $85 each. Definently worth it they help protect crisscrossed stern dock lines from rubbing on engines covers.

I agree with Gradyfish. I took my canvas off to clean and protect the eisenglass at home on the deck and grass and ended up getting it dirtier and created more scratches. From now on I will clean and protect while it is up on the boat.

Guys, Thanks. I will invest in a dedicated flag post for the center of my t-Top rod Holders. I take flying the star and stripes seriously and on land it should not be flown without a light shining on it or in bad weather. Does the same apply for boats. Do you take it down or keep on your boat...

Just bought my first flag to fly on outrigger. Which outrigger port or starboard is the appropriate one to fly the stars and stirpes? I would assume the port so others in front of the boat would see it on my right side.

If you are speaking about matching the gel coat. GW dealers have a patch about 2oz of gel coat to fix scratches, gouges or holes in gel coat. If you need more the company spectrum color who supplies this patch has larger quantaties that match GW color and can be ordered through the web. Paint to...

Look up the part number on the yamaha web site and the last few digits is the paint code ie 08D as an example. Then go to color rite web page and find the maring paint using this code. My local Yamaha dealer stocks spray cans of the most commom colors from color rite, primer and clear coats...

Twin F350?'s I have sailfish with Twin F250's and it really moves could only imagine what F350's would do probabby too much HP for the 28ft. Having a larger gas tank would be nice for extended range.

Tuna Man Thanks, I called my GW dealer and they said the same thing that there is an inverter behind the wall insert. Now the only problem is to try to remove the insert which is basically a half wall, but the screws have bolts in the back and it is very difficult to reach the bolts to hold...

Bob,Thanks, there is already a DVD player that works correctly and I assume is already hooked up the same way the original tv is based on DC so I trust an inverter would only be needed for the TV. Are the small enough to fit in acces hole behind TV?

2006 Sailfish has sharp Aquos 15" LCD tv that shows image upside down. Warranty issue so new Sharp LCD tv has beem shipped, but it is now a different model. The Aquos LCS tv is powered by DC plug but new tv sent is powered by regular 110 plug. Any suggestions how to install without useinga...

HDGWJOE Yes same one. Purchased at Atlantic City boat show when then were adding double floor 3rd tube for canopy and vaccum pac at no charge. The hard pack is great it is not a canister, but hard pack so it stays dry and will not get damaged by being punctured. It advertised at 36lbs for the...

Just purchased Winslow 6 man with canopy, double floor in ultrapack which is vacuumed packed into a 18'x8'x22' hard pack that weighs 43lbs. 4 man would weigh approx 36lbs. Hopefully never need to use it ,but given small size and realtivley light it was agreat choice for me.

Purchased 2006 GW sailfish and when online in Dec to register as new owner and GW confirmed they recieved info after I had not recieved anything and now am getting anchor line in the mail first issue just received so took afew months but may be similar as when you order a magazine the...

I just used the Woody wax CPR kit. Applied the woody wax. Used bronze wool to work it on the aluminum t-top. Let it sit overninght and wiped it off the next day. I was very pleased with results. Boat is two years old and previous owner did not wash aluminum t-top especially top near canvas so...

Thanks everyone for the advise. I will try these options out this weekend along with the woody wax cpr kit if weather holds out. We are having the inside cusion covers dry cleaned as they did not have any any moisture controls while in shrink wrap.

2006 282 sailfish delivered today and I spend the day giving complete cleaning. I knew the undersideof T-Top had some small mold spots on outer underside egde. Most came off with soap and light scubbing. Any reccomendation on what to use on tougher mold spots on T-Top? Outside of this and the...

Look like the safe way to board when you do not have hardtop to grab onto. Check out this web site http://www.birdsallmarine.com/ They have one described as: Come Aboard A simple but effective design makes boarding your boats safe and easy. The “Come aboard” is made of anodized...

Rod holder cutting boards I recently bought mine at http://www.birdsallmarine.com and they shipped very quickly. They come in two sizes and are of high quality and can be rotated and locked into various positions.