Search results

  1. I

    Power pole or Talon on235 Freedom

    Adapter plates for your shaped transom (swim platforms) … have a look at this: https://power-pole.com/adapterwizard/mounting-options I don’t see the Freedom 235/255 on this list, … a call to JL Marine might provide a specific adapter plate fitment confirmation.
  2. I

    Power pole or Talon on235 Freedom

    In Wilmington, NC there are many Freedom 235s in our waters with just the PowerPole and a bracket. I’ve never seen one with a jack plate.
  3. I

    Fuel Gauge always showing full

    My sending unit failed with the fuel gauge showing full. I was told by the dealer that this is “not uncommon”. I contacted …https://kus-usa.com/ and they were able to map the GW part number to their standard Part Number … SSS/SSL Sender - SAE 5 Hole Pattern Mount - 10".
  4. I

    What is this bare wire connected to the Yamaha engine bracket?

    Thank you for the quick response and suggestion of using silicon on the tip!
  5. I

    What is this bare wire connected to the Yamaha engine bracket?

    Collective brain trust what is this exposed wire connected to the engine bracket? The end of this bare wire is sharp and today pierced my PowerPole hydraulic line and caused some sandbar troubles. More importantly, can I take a file to the sharp edges of the wire-holder bracket and the tip of...
  6. I

    Sending Units

    Some good advice provided wish I’d known about the “clock” position alignment recommended by @Hookup1 … would have saved me much head scratching, on my recent Sender replacement. I had kus-usa.com lookup the part # used for my GW Model … “SSS/SSL Sender - SAE 5 Hole Pattern Mount - 10", $59...
  7. I

    Navigation lights

    In my 2014 251 Coastal Explorer I had to remove the starboard and port cup holders to get enough reach to the NAV electrical connections. I found the OEM NAV lights were: Atwood Marine 2 NM Led Stainless Steel P# 3550 DC-1 The Atwood part had the same electrical termination as the OEM...
  8. I

    What would you do differently?

    Download the CaptainGrady app. It allows you to input your vin/model so the content is specific to the 251 CE. In edition to ease of navigating the User Manual, the App includes videos and extended details on all the boat’s primary systems (trim tabs, engine tilt/trim, lighting, live wells...
  9. I

    Electric trolling motor installation on 257 Fisherman

    I am happy with the swivel and quick disconnect. For me the priorities were, (1) not to clutter the gunnels with a TM when the boat is in its sandbar queen profile, (2) a durable install that won’t hurt the boat while fishing (3) easy on and off of TM so the wife is happy.
  10. I

    Electric trolling motor installation on 257 Fisherman

    This is the swivel and disconnect I used: Magnum Metalz was able to do black anodized as a custom option. I also had Magnum Metalz make a custom deck mount plate to match up the Grady White bolt pattern (which was predrilled for the Trolling Motor option that came w/my boat). The only other...
  11. I

    Colors of vinyl?

    I was told by GW if the boat is over 5-years old (my boat is a 2014), they do not stock the vinyl parts. They did give me the vinyl manufacturer which was making the material at the time. I contacted Omnova and evaluated the vinyl colors/patterns online. They sent my 4 samples...
  12. I

    2020 Suzuki 9.9 kicker question

    Glad you figured it out. Don’t kick yourself too hard, most of us have many stories that could beat this one.
  13. I

    Fuel Sender and Ski Pylon

    Not entirely sure if this will work for you, given the location. But in an old rowboat I cut an access hole to fix a leaking spot at the bow eye. After the repair I found a Tempress access hatch that closely matched the hull color and fashioned a little storage that I didn’t have before. I...
  14. I

    2020 Suzuki 9.9 kicker question

    Have you tried pushing some weed whacker line done the telltale/pee line? Perhaps spiders or mud daubers have set up a home in the line and you’ve got a blockage? I had a similar at sea overheat (not a Suzuki) and it turned out to be mud daubers. I cleared the line and was good to go...
  15. I

    Positioning Freedom 235 on boat lift

    Uploaded table for convenience
  16. I

    Positioning Freedom 235 on boat lift

    Bunk spacing off center line is also found here: https://www.greatgrady.com/threads/boat-lift-bunk-spacing.29008/
  17. I

    Insurance Recommendation Needed

    Geico renewed my coverage. 10th year with 3 different boats, no claims. On a lift at my house in Wilmington. Perhaps too much risk/exposure in South FL? $562/year ACV.
  18. I

    Electric trolling motor installation on 257 Fisherman

    I just sent you a private message with my contact information. Please feel free to give me a call.
  19. I

    What are your Top 3 favorite boat mods or additions you've made?

    I know this thread is for the best 3 mods of all time … but coming out of winter, we are looking for good boat content. A big, medium and small mod in the off season of my 2014 251 Coastal Explorer. BIG I had Gore Marine of Wilmington mount a hardtop using the factory pipework. The new hat...
  20. I

    Electric trolling motor installation on 257 Fisherman

    I have a Coastal Explorer 251, that I mounted using a downrigger swivel in the OEM ”Trolling Motor Mount Points”. If measurements or pictures could help for your model, let me know.