Search results

Thanks again to everyone. This is all great help. I will post results when I complete the repair.

Thank you for the quick reply. I have the one with 4 screws, Plastic retaining ring OD is approx 2.75". I see there is one of that size in first amazon link that you sent. I also contacted a couple marinas and they told me to bring the scupper to them .

I see that this has been discussed before, years ago. I am looking for possible new information. I have a 1997 Adventure 208. I am searching for the transom scupper flap replacements (or the entire assembly). I have not seen anything online (yet). I would also like to replace the rubber gaskets...

The max tab adjustment is only about 30 - 40 degrees, and it did reduce the pull to starboard. If I let go of the helm, it will turn to starboard quickly. So, it sounds like I am headed for a hydraulic steering solution. Also, as seasick suggests, I am hoping not to have to remove the motor...

As far as the trim tab adjustment, following the Suzuki motor manual instructions, I moved the rear end of the trim tab all the way to the starboard side. Lesser adjustments were tried, but the farthest out is what gave the least pull. Also, from your description, I do not have NFB on the...

Yes, right now it is cable steering.

Will look into it. Thanks!

Hello, This summer I bought this 1997 Grady White boat. My first Grady, so I am not familiar with it. The motor was replaced a couple years ago with a Suzuki 200 (DF200AP). Runs great, but it pulls to starboard, not much at medium speed (18mph), a lot at high speed (35mph). I have the drive trim...