Transom scupper

G

Gus_Ag

Member
Joined
Aug 10, 2024
Messages
8
Reaction score
2
Points
3
Age
75
Model
Adventure
I see that this has been discussed before, years ago. I am looking for possible new information. I have a 1997 Adventure 208. I am searching for the transom scupper flap replacements (or the entire assembly). I have not seen anything online (yet).
I would also like to replace the rubber gaskets on the 6" motor well access lids.
Is there a marine parts store that might carry these items?
Thanks.
 
There are a multitude of different marine parts stores online as well as you've probably also got a few locally nearby. When you're talking about the scuppers, are you talking about the style with the tab and the one set screw holding it into place, or the one with the four screws?


 
Thank you for the quick reply. I have the one with 4 screws, Plastic retaining ring OD is approx 2.75". I see there is one of that size in first amazon link that you sent.
I also contacted a couple marinas and they told me to bring the scupper to them .
 
  • Like
Reactions: glacierbaze and Mustang65fbk
Don't worry it's a standard size. The problem with standards is that there are so many different ones to choose from! I went thru this two years ago when I wanted to replace my scupper valves. They vary slightly in diameter and hole placement. Event though they have 4 holes they won't line up with the existing screw hole in the thru hull. You could drill new ones but I didn't want to do that.

What I did was pull one of the old scupper valves and look for the manufacturer on the nylon ring. That worked for me.
 
Thanks again to everyone. This is all great help. I will post results when I complete the repair.
 
You must log in or register to reply here.