Search results

The transom shower on the Grady 360 is this one http://www.replacementboatparts.com/aqu ... egree.aspx and they sell the cup by itself. Just replaced mine

I am replacing all of my electronics on my 360 and I would like to find out more details on these two solutions. Can y'all share what you ended up doing? Thanks!!!!

I have furuno VX2's and I want to replace them with something bigger (hole is already there for the VX2). do you guys know if the Garmin 7416 would fit? Any Garmin 12 inch is too small... Can the cutouts be reglassed otherwise? how much?

Hi all, Does anyone know how hard it is to remove the teak and holly interior flooring from a Grady 360? Trying to see if it is glued down so hard that it would have to be taken out in chunks. Mine is very scratched and I figured it is cheaper to remove than refinish. Thanks in advance

Funny mine just started doing the same thing this weekend. I am not near the boat. Who makes their pumps.

Hi, I was doing work around my bilge pump on my 360 and now my livewell pump is tripping the fuse at the switch. I hear the pump kick in and then the fuse pops. Who makes the inline pump on a 360? It's odd that the pump would have stopped working at the same time i was messing with the bilge...

My f250 had the same symptoms and it was a lose wire going to the computer..

the thruster on the 36 is a lewmar. Regardless, you can switch the wiring from port to starboard and see if the clicking switches sides or not. in my case it pointed to the selenoid...

i built a rod holder for the shower. it holds 8 rods with 50 class reels and 6 more under the back berth for a total of 14 rods. You can put all sorts of tackle in the drawers and genset compartments. I take my tackle out of the boat every time, so i keep 2 tackle backs in the dock box (inshore...

I never use the synch as the center engine seems to capitate in syNch mode. I have triple f250 3 blades.

I have a 360 express for the exact reasons you are posting. I fish with the big boys in any sea my stomach will endure and also take the kids to sand bars etc. that being said, as everyone else said, it is not the same to pull up to a sandbar with a 36 ft boat. The curtains act like a big sail...

I have had the same problem 2-3 times. The thruster motor selenoid is corroded. About $500 part. Grady ended up replacing my thruster as the boat was leaking water, thus submerging the thruster in water and the selenoid going bad. A little bit of salt water will ruin it in a few day...

My boat is back in the water and just went out in 4-6 ft seas with 4-5 sec periods. we got the snot beat out of us for sure. Everyone except the 13 year old was sick on the boat! The fix worked perfectly and water drains into the right drain pipe correctly and my bow thruster was dry as a bone...

You can call fisher panda directly for the kit. or you can order online too. They have a great Customer service department. if the impeller broke, make sure you check the intake and output to make sure there all of the pieces of rubber are gone before puting in the new one...Yes,grease is very...

I am sure you fixed this already, but I thought I would post that I started having the same problem and it turned out that a piece of the impeller (actually lots of pices) was stuck in the metal pipe above the water pump. Stuck a little screw driver and all of these rubber pieces fell out. At...

Bought a $40 space heater from Costco. Best investment ever. That cabin is warm in a few minutes without running the a/c. The a/c definitely does not work when the water is below 40 degrees. Plus it works when the boat is out of the water in the spring! Highly recommend it. It has a thermostat...

No, from standard battery bank...

You are right. You can almost beach the boat (check tides) and do it yourself. Those drain grates ARE a pain as you can never get all of the growth out. My engine brackets and temp ducer gets messy too and the bow thruster as well...I do 2 haul outs a year. One with a full wax and the other just...

Eddie and Dan travelled to Wanchese today and discovered a manufacturing problem. They will be back next week with a new bow thruster and all of their tools to fix the issue. The anchor locker did not get enough glass around the drain tube and most of the water ends up in the foam in the hull...

What about a quick haulout, powerwash while it is in the sling, change zincs and put back in the water? it seems faster and cheaper.