Search results

The cleat is fastened to the pulpit only. The anchor hatch was undisturbed as the windlass was mounted on the pulpit fixture well forward of the hatch.. I have a separate "rock anchor" with rode that I keep in the anchor locker which I move before deploying the Danforth anchor. I installed...

I rececntly had the same model windlass installed on my 97' Islander. The cleat was moved several inches forward of its' original location and works fine for securing the anchor rode. Works very well. yb

Thanks for the feedback. We tried hooking the bottle of steering fluid up to the reservoir with the factory fill hose and rotating the wheel many times. There may be some improvement but it is slight. The wheel rotation is "lumpy" and stiff. I am in San Carlos Mexico and will have to wait...

I have a 97' Islander with hydraulic steering. I think thats the proper term. It takes a lot of wheel rotation to make the engines move for turning. The resevoir at the helm is full but it acts like there is air in the line. Any suggestions or is this just the way it is? yb

FYI I got a response from the Lewmar Tecnical people. They say that adding a connecting link is not a good idea. yb

I am about to install my new Lewmar Profish700 windlass and I would like to add a length of chain ahead of the rope rode. If I join the two sections of 1/4" chain with a cold shut (split link) will this link fit thru the anchor windlass pawls O K ? yb

1. yellow boy 2. Dale 3. 1997 268 Islander 4. 1997 Evinrudes

I have a pair of Evinrude 150's. I have a difficult time starting the port engine and pulling the spark plugs I find them fouled with oil. In reading my Clymer Manual I see a warning to not squeeze the bulb connected to the oil tank as this will fill the carberators with oil. After reading...

I installed a 30 amp 3 bank charger and kept the existing batteries for a while longer. I have a Honda "suitcase size" gen set aboard so my dead battery risk is minimal. yb

I called Grady and got the same answer. "The prewire if installed would run from the helm to the bow and power should be taken off of a helm area buss bar". I too think this is not the way I want the windlass wired. I will run dedicated cabling from the battery for the windlass. Thanks to all...

I am about to install an anchor windlass and have been told that G/W's are pre wired at the factory for this install. I have poked around the anchor locker but have been unable to locate any cable ends. Can anyone comment on this? yb

Not at the moment.....

Is there any grocery store type soap that will lather in salt water?

I have ordered a Lewmar Pro Fish 700. This has a "free fall" feature but I don't know if it also has a "power down" mode. I am going to install it with a foot control switch at the windlass. Considered the wireless feature but from past experience I choose to have my hands free. Thanks for...

I am thinking seriously of adding a power anchor windlass to my 268 Islander. I want a foot pedal control at the winch as well as a control at the helm station.and I am wondering if a 12v motor will give me enough power, thinking I could go with a 24 v unit and wire the batteries accordingly...

windlass Thanks all for the feed back. I will talk to the local shop this w1eek and see what they have to offer. yb

I am in the process of adding a battery charger to my 268 Islander and I am thinking that having a power windlass would be a nice feature. I know I would have to replace the anchor line with chain and I am wondering if I need to consider adding a dedicated battery for this feature. Would like...

Sounds like AGM's are the way to go. Thanks for the feedback all. yb

I am about to replace my 3 12v batteries and am consideringadding a charger to the system. Solar- trickle charge or ?j Would appreciate advice and recco. yb

I need to replace the batteries on my 268 Islander. I have looked around the forum for any reference to maintenance free batteries but have found nothing. I used Optima batteries in my off road Jeep for years. Does anyone have any experience or opinions to share about using them in a boat? yb