Search results

We have decided to re-power our 2007 GW360 with triple Yami 300s instead of the original 250s. Is anybody running a 360 with the 300s spinning four bladed props vs the stock three bladed props? Since we have to buy new props anyway -- which also is the reason for the re-power. Looking for better...

Does the FP genie on the 360 have a separate starter battery or does it take power from the yami starter bank? We just had all the batteries replaced but the genie would not start due to low voltage. The yamis started fine. I have never seen a genie battery but perhaps it takes off the bow...

I want to mount two rod holders to our 360 transom near the centerline. I saw a recent post of this done by mounting rod holders on top of a 330 transom cooler box, but I don't want them in the way if fighting from the chair directly aft. How thick is the aft wall of the transom cooler box on a...

Our 8kw Panda genie chews up impellers faster than a bear after hibernating all winter. Last one only ran 40 hours before loosing a couple of wings. Some others last 10 hours or less. We usually lose it while on plane at over 30 mph and suspect that the flush mounted seawater pick up is not...

We took a serious bump on the port rubrail about 15 feet from the bow a few months ago and other than a dent in the rubrail did not think much of it. Last weekend got into 10 foot seas and was taking water over the bow for a few minutes. Water was coming into the cabin on the port side from...

Is there a separate cushion somewhere that covers the table top of the settee on a 360 when the table is lowered to make a berth? Or do the back cushions - which look curved -- flex into a straight shape and fill in that space?

The Sealand black water holding tank on our 360 has blown out its tanksaver valve while offshore in the GOM twice in the past month. The valve is the device set in the top-rear of the holding tank that is supposed to vent air into the tank during vacuum pump outs to protect the tank from...

Our 8kw genie with 600 hours has burned up three raw water impellers in the past two weeks on a 2007 GW360. It runs fine in the slip for hours with normal temps but after less than an hour or so on plane the genie shuts down and displays hi temps at cyl head and fresh cooling water in. It is not...

I just bought a 2007 GW 360 and the maintenance log shows genset oil changes every 100 hours or so for the first 500 hours. The Panda manual says change oil at first 35-50 hours and afterwards the oil is to be changed after 100 hours. But later in the manual there is an oil change schedule...