Can anyone point me in the direction of some new rocker switches for my 208 that will fit correctly? Also in need of replacing all the breakers and unsure of what amp breaker to run I was thinking 15/20Amp on all 8 breakers? Any help would be greatly appreciated this my first grady
94 208 adventure switch panel replacement
- Thread starter Aiiezzi
- Start date
I am not at the location of my 208 but I am pretty sure that not all breakers are the same capacity.
A while back, I saw a 'new' panel all wired and ready to go on EBay. Do a search
A while back, I saw a 'new' panel all wired and ready to go on EBay. Do a search
I’ve been looking, just was wondering if anyone knew a brand of rockers I could purchase to replace mine.
Ling king
Active Member
- Joined
- May 31, 2020
- Messages
- 41
- Reaction score
- 8
- Points
- 8
- Age
- 60
- Location
- Ventura County
- Model
- Sailfish
I’m gonna check out new wire for a custom panel, I wish that was the case but my switch panel all the connections on the breakers and switches corroded off. And I wanted to try to keep the original panel but if I can get a panel made to fit it’s spot that’s the plan, it will save me the headache of sourcing switches to fit and new breakers
These fit my ‘93 209
m.delcity.net
The breakers are different amperage depending on the circuit. They are easy to remove if you unscrew the panel and then the little rubber boot over the reset button. I searched using the info on the breaker and found these. Just match the amperage of the existing breaker. Also, I think the GW manuals have a wiring diagram that shows the amperage of each circuit.
Look at this on eBay
(2) E-T-A 1658-621-00-P10-10A Circuit Breaker 10A 240VAC 28VDC NEW!!! Free Ship
LED Full Size Euro-Style Rocker Switches - SPST
Illuminated Euro-style full size rocker switches available in SPST actuation. Features unique drainage system design to funnel water away from internal switch components.
The breakers are different amperage depending on the circuit. They are easy to remove if you unscrew the panel and then the little rubber boot over the reset button. I searched using the info on the breaker and found these. Just match the amperage of the existing breaker. Also, I think the GW manuals have a wiring diagram that shows the amperage of each circuit.
Look at this on eBay
(2) E-T-A 1658-621-00-P10-10A Circuit Breaker 10A 240VAC 28VDC NEW!!! Free Ship
I just ordered a whole custom setup from new wire marine. Most of my breakers from the manual say they are 15amp. I just acquired this boat from a salvage site, she went down during a storm, but the 04 150 Johnson runs, it was pickled then run after salavaged, I got it for a price I couldn’t refuse lol so, I’m draining the tank and starting the process of getting her water ready again!