Adventure 208 steering

I may have misled you a bit. I have run cables on different boats and mat have confused the 208 with a Mako I once owned. On the 208 open the pie plate in the cabin on the wall behind the helm. That may be where you will see the rigging tubes. It sucks getting old:) Suffering from CRS!
 
The rigging tubes should be easily located if you have the rear deck up. Shouldn't need to take up the deck near the helm up. They appear to be pvc and run from the aft to the kick panel in the helm area starboard side.
 
Fishtales said:
The rigging tubes should be easily located if you have the rear deck up. Shouldn't need to take up the deck near the helm up. They appear to be pvc and run from the aft to the kick panel in the helm area starboard side.
Click to expand...
The 208 does not have a rear deck lid. There are two pie plates in the motor well. You can see a bit especially with a mirror by looking from the rear lockers. The starboard side which is where the rigging tubes end also contains the batteries making access a bit difficult
 
You must log in or register to reply here.