We have an 05 Sailfish 282. The forward bilge pump went out. It is an Attwood V1250 and states "Fuse - 4 Amp" on the top. This corresponds to breaker on the dash which also states "4 Amp." The problem is that all the replacement pumps require a 6 Amp or higher fuse unless I drop to a 500 gph pump. My question is how difficult is it to replace the circuit breaker on the dash with a larger Amp? There is a dash access panel in the head but the breaker doesn't look like it just slides out. Also, will everything work OK if I upped the breaker and installed the heavier draw pump (for example, the Rule 1500 that draws 4.8 Amps and requires a fuse of 10 Amp ? Thank You...