Dash conversion, Sailfish 272

TheBlackPig

TheBlackPig

Member
Joined
Sep 25, 2016
Messages
6
Reaction score
3
Points
2
Model
Sailfish
Hi fellow Grady Lovers.

I’m in the process of making a new fibreglass dash console add on for my Sailfish 272, 1997. I want to bring this ol’ girl up to scratch with all new electronics. Has anyone out there ever done this on this model before? I’d love to hear your stories and how you tackled the build. Hopefully share some pictures. I can upload some to show where im at at the moment if anyone’s interested. Two 13 inch screens side by side is the order of the day. And the old flapdoor dash console is just waay too small for this. So…lets get building!
 
I just did 2 10 inch Garmins and they barely fit. I opted not to cut any fiberglass. They are mounted on black acrylic and are much easier to see and control mounted forward. 28 Sailfish not the 27 but they are probably similar.
 

Attachments

  • Project 4.jpg
    Project 4.jpg
    103.8 KB · Views: 8
Legend said:
I just did 2 10 inch Garmins and they barely fit. I opted not to cut any fiberglass. They are mounted on black acrylic and are much easier to see and control mounted forward. 28 Sailfish not the 27 but they are probably similar.
Click to expand...
Looks great Legend! Exactly what I had in mind, I just thought it it would be a bit underwhelming with two 10 inch screens if going all out on electronic upgrades. I came to the exact same conclusion, 2 x 10” is max for the flapdoor dash. So I would need to rebuild the dash. Which at first felt daunting as I have never really made much out of fibreglass. I have watched a lot of Boatworks Today and Fishbumb tv over the years though, and im a builder by trade, so, hopefully, I can pull it off.
 
Here are some pics of my mockup plug.
 

Attachments

  • 20260807_164052.jpg
    20260807_164052.jpg
    1.3 MB · Views: 14
  • 20260807_164002.jpg
    20260807_164002.jpg
    1.3 MB · Views: 14
  • 20260807_164030.jpg
    20260807_164030.jpg
    1.3 MB · Views: 12
  • 20260807_163936.jpg
    20260807_163936.jpg
    1.5 MB · Views: 12
  • 20260807_163922.jpg
    20260807_163922.jpg
    1.1 MB · Views: 12
  • 20260807_164047.jpg
    20260807_164047.jpg
    1.3 MB · Views: 14
Would be really cool to see the steps you are going through to make the plug and make the final piece/install.
 
I love using foamboard for templates - started using that about 20 years ago as a "Hmmm, I wonder if this would work?" kind of thing :cool:

I even used foamboard for the core of a floor hatch that I rebuilt!

Been thinking of doing something somewhat similar with my '82 - interested to see your steps along the way. I think I may have to cut a recess into the dash, first, though - otherwise the electronics would be too high.

Thanks for posting this!
 
You must log in or register to reply here.