i've changed the poppet valves and water pumps...still alarms, it is continuous with slowed rpm...only happens when not on plane...any help appreciated.
thanks
larry
thanks
larry
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
engine alarms
- Thread starter applebeepa
- Start date
A
Anonymous
Guest
engine alrms
good oil pressure....yamaha 130's /port engine...just had everything changed...isn;t the oil alarm intermittant? sorry i am new to boating.
good oil pressure....yamaha 130's /port engine...just had everything changed...isn;t the oil alarm intermittant? sorry i am new to boating.
JUST-IN-TIME
Well-Known Member
applebeepa said:i've changed the poppet valves and water pumps...still alarms, it is continuous with slowed rpm...only happens when not on plane...any help appreciated.
thanks
larry
what year 130?
changed t-stats?
change w-pump housing?
JUST-IN-TIME said:applebeepa said:i've changed the poppet valves and water pumps...still alarms, it is continuous with slowed rpm...only happens when not on plane...any help appreciated.
thanks
larry
what year 130?1998
changed t-stats?no
change w-pump housing?[yes]
JUST-IN-TIME
Well-Known Member
applebeepa said:JUST-IN-TIME said:applebeepa said:i've changed the poppet valves and water pumps...still alarms, it is continuous with slowed rpm...only happens when not on plane...any help appreciated.
thanks
larry
what year 130?1998
changed t-stats?no
change w-pump housing?[yes]
t-stat check time asap
JUST-IN-TIME said:applebeepa said:JUST-IN-TIME said:applebeepa said:i've changed the poppet valves and water pumps...still alarms, it is continuous with slowed rpm...only happens when not on plane...any help appreciated.
thanks
larry
what year 130?1998
changed t-stats?no
change w-pump housing?[yes]
t-stat check time asap[do you mean thermastats? i will check asap, is this an expensive or difficult repair?]thanks for your help,larry
JUST-IN-TIME
Well-Known Member
Boats Rock
Well-Known Member
I had the same problem. When I removed the thermostats they were clogged. I had to dig at the ports with a piece of wire and run a lot of water down the passages. I found when you flush after use it only pushes water up to the bottom of the thermostats not threw them. So this winter I removed them,washed out the passages and pured salt desolver down the holes.