Repairing/Reupholstering my bolsters

[Meanwhile]

I had a local guy do my bolsters for $600. I should have done it myself.

OP - did you add the bolts that are shown in the first photos? I'm looking for a way to avoid the screws that the factory used.

 

[Madhatter0]

The bolts were there when I took them off the bolts attach to the bolster with what's called a
"TEE Nut". You could also use a "fang bolt" then drill through the rail and a washer and bolt on the back side. Please folks the pictures are for reference only I used SS.