I recently installed a windlass and I am now looking to add two more cleats at the bow. Anyone know of the correct replacement?
Replacement Cleat 1994 232G
- Thread starter Germanmattlanta
- Start date
There's no "correct" placement in the sense that there is only one specific place they must go. Put them where it works best for you - add a decent backer plate.
Mustang65fbk
GreatGrady Captain
- Joined
- Jun 4, 2020
- Messages
- 3,132
- Reaction score
- 808
- Points
- 113
- Age
- 40
- Location
- Seattle
- Model
- Seafarer
Ummm.... I could be mistaken but I don't believe he's asking about the "placement" for the cleats, it sounds like he's asking for the part number for a stock "replacement" cleat? Which from the catalogues I've seen online, they only seem to go back to 2004, so that's about the closest that I can get you. That being said, a 2004 Grady White 232 Gulfstream should be a part number of 10-283 for a heavy duty cleat in an 8" size for the "replacement" part number. The first link is for a used cleat, looks like they're selling each one separately, the second link is for a brand new one, of which it looks like they have a few for sale. The third link is for the 2004 parts catalogue, and yes I know your boat is a 1994, but as mentioned that's the oldest one that I can find online. Good luck!
GRADY WHITE HEAVY DUTY 316 STAINLESS 8" CLEAT | eBay
316 STAINLESS STEEL HEAVY-DUTY CLEAT MADE EXCLUSIVELY FOR GRADY WHITE BOATS. EXTRA BEEFY STAINLESS WITH A HIGHER RISE THAN OTHER 8" CLEATS. GRADY WHITE 8" HEAVY DUTY CLEAT. THIS IS A NEW, DIRECT FROM GRADY PART.
www.ebay.com
Last edited:
I am not sure if you are asking about the actual cleat or if you are asking about where to mount the cleat.
In either case Denis's answer is sound advice.
In either case Denis's answer is sound advice.