- Joined
- Aug 22, 2010
- Messages
- 22
- Reaction score
- 0
- Points
- 1
Hi all -
Need to replace my scupper valve assemblies on my '93 Escape. These are for the deck drains and they sit above the water line (most of the time). They are the type that have the white plastic ring and the flap behind them held on by four screws.
My question is do the screws need some type of sealant on them when I re-install or are they okay as is? Seems to me they should have something on them, but don't want to seal them in so I can't ever get them off!
Thanks,
Fish
Need to replace my scupper valve assemblies on my '93 Escape. These are for the deck drains and they sit above the water line (most of the time). They are the type that have the white plastic ring and the flap behind them held on by four screws.
My question is do the screws need some type of sealant on them when I re-install or are they okay as is? Seems to me they should have something on them, but don't want to seal them in so I can't ever get them off!
Thanks,
Fish