Hello all,
Went down to the boat this past weekend with the wife and kids. This usually results in me working on some minor repair, cleaning up, reorganizing the cabin for the next fishing venture etc while they work on their tans. This trip I was going to tackle the factory horn replacement with a stainless steel unit. 2 screws, 2 wire splices and some 3m 4200 adhesive, how hard can it be....Next day I am down there with a truck full of tools and instruments of destruction trying to complete the job. The wires from the old horn either corroded or failed due to abrasion and I cannot run a fish tape up the side of the cabin to the breaker panel. I imagine that the wiper motor wiring follows the same path. Has anyone replaced this wiring and can offer some tips to complete this job. I don't believe there is a rigging tube from this area but I have contacted Grady White to inquire about the wire path. The horn has not worked for a few years and I have gone with the portable airhorn and whistle route for meeting the CG requirements but knowing that the horn does not work bothers me for some reason.
Went down to the boat this past weekend with the wife and kids. This usually results in me working on some minor repair, cleaning up, reorganizing the cabin for the next fishing venture etc while they work on their tans. This trip I was going to tackle the factory horn replacement with a stainless steel unit. 2 screws, 2 wire splices and some 3m 4200 adhesive, how hard can it be....Next day I am down there with a truck full of tools and instruments of destruction trying to complete the job. The wires from the old horn either corroded or failed due to abrasion and I cannot run a fish tape up the side of the cabin to the breaker panel. I imagine that the wiper motor wiring follows the same path. Has anyone replaced this wiring and can offer some tips to complete this job. I don't believe there is a rigging tube from this area but I have contacted Grady White to inquire about the wire path. The horn has not worked for a few years and I have gone with the portable airhorn and whistle route for meeting the CG requirements but knowing that the horn does not work bothers me for some reason.