Thru Hulls

K

knotflyn2day

Member
Joined
Jun 28, 2019
Messages
9
Reaction score
2
Points
3
Age
49
Model
Chase
Hello all,

I need to replace my thru hulls. Prefer to use similar components. Any suggestions or contacts would be appreciated. I have the following boat;

2001 263 Chase
 
knotflyn2day said:
Hello all,

I need to replace my thru hulls. Prefer to use similar components. Any suggestions or contacts would be appreciated. I have the following boat;

2001 263 Chase
Click to expand...
Recent thread

Transom drain tubes

So I pulled the old scuppers off the transom (265) and saw that two of the three drain tubes were not flared on the outside of the transom... The flare on the inside on the middle drain had corroded and broken off, so I was keen to replace at least that one... I chiseled out the middle and...
www.greatgrady.com www.greatgrady.com
 
I assume you are not talking about scupper drains ( maybe you are).
For the hull thrus, bronze for below water line and either stainless or Marelon plastic for above the water line. The Marelon would be white. No stainless below the water line.
 
Last edited:
seasick said:
I assume you are not talking about scupper drains ( maybe you are).
For the hull thrus, bronze for below water line and either stainless or Marlon plastic for above the water line. The Marlon would be white. No stainless below the water line.
Click to expand...
Correct. Not the scuppers. I just need a source for the stainless/bronze for the water line and stainless for above the water line. Would prefer to stick with the vendor Grady is using as they have been great
 
I don't think the water line ones are stainless/bronze. I think they are chrome/bronze

I think they are Perko similar to

Amazon.com : Perko 0350005DPC Chrome-Plated Thru-Hull Connection for Use with 3/4" Hose : Boating Plumbing Fittings : Sports & Outdoors

Amazon.com : Perko 0350005DPC Chrome-Plated Thru-Hull Connection for Use with 3/4" Hose : Boating Plumbing Fittings : Sports & Outdoors
www.amazon.com

Here is an example of Marelon fittings

Thru-Hulls Overview

Their strength, light weight and freedom from corrosion and electrolysis make this flush head thru-hull connector ideal for use above or below the waterline. Threaded thru-hull connector with a mushroom head. Threaded thru-hull connector with a mushroom head and barbed tailpipe ideal for hose...
www.forespar.com
 
Last edited:
I have a 330 and relaced all the Bronze/Chrome ones except 2. I used Gem Lux. Very high quality.
 
You must log in or register to reply here.