where to get extra long thru hull fittings 86 offshore 24?

L

lime4x4

Well-Known Member
Joined
Mar 24, 2011
Messages
339
Reaction score
2
Points
16
Location
Palmerton, Pa
I need to replace the thru hull fittings in the transom for the deck drains. They have 1 1/2 hose attached to them. The problem i'm running into is finding long enough ones. The plastic ones i took out had 5 inches of thread on them. I've tried fittings that were for 3.5 thick transoms and i'm unable to get atleast the width of the nut unto the fitting.
 
Re: where to get extra long thru hull fittings 86 offshore 2

http://www.jamestowndistributors.com/us ... with+Valve

I've 1 that I bought from West Marine yrs. ago. You raised my interest but I couldn't find them at WM.

Couldn't seem to find dimensions at the above website, but it looks like it. If you call would appreciate what you find, like to keep a couple on hand.

I was interested yrs. ago in something bronze or stainless but could never find the exact size.

Don't know if you'll be able to click on above site.
 
Re: where to get extra long thru hull fittings 86 offshore 2

reading thru the question and answer that thru hull would fit up to 3 1/8 thick transoms. So it's not long enough either. Someone has to make one.
 
Re: where to get extra long thru hull fittings 86 offshore 2

I wouldn't swear to it but unless your transom thickness is greater than mine then it should work. What I've got measures 3 1/2" threaded part and it works for me. Once you tighten the locking nut, which really doesn't hold the scupper, then that gives you the 3/8" less that's adverstised.

For 22bucks I'd give it a shot.

You'll have to email Attwood. Ask them for total dimensions.
 
Re: where to get extra long thru hull fittings 86 offshore 2

Almost 3.5 inches. The transom doesn't appear to have been replaced. The plastic thru hulls that were in there had threads that were 4.5 inches long
 
Re: where to get extra long thru hull fittings 86 offshore 2

Starling Marine in Morehead City, NC had some in stock a few years ago.
 
You must log in or register to reply here.