WIPER BLADE REFILL HELP

[GWL139]

Hi all,

I know there's been posts previously, but does anyone have any current info regarding aftermarket wiper blade insert refills? I have a '00 232G with a pair of 20" blades, and the rubber is shot. Not really looking to replace the complete blade, since the s/s component is fine. I can tell by the blade itself that the rubber wiper component has the metal spines with notches that would permit replacement of the rubber. From a little research online, it looks as if the Anco 52-20 would be a direct replacement. Not as wide, but has the pinched center section with hole to fit into the clip on the OEM arms. Any help would be appreciated.

Tight lines

 

[g0tagrip]

Take the blade to an auto parts store. I found a good replacement for mine at Advance Auto parts. Try Advanced Auto Parts, TRICO # 47-800, 8mm square claw blades, I paid 7.52 including tax.

 

[Finatic]

I just replaced the blades on my 2000 Gulfstream over the weekend. I bought the blades at NAPA. The part # is 60-2008. They are listed as severe duty truck blades. Perfect match to the original blades.

 

[Parthery]

I just replaced the blades on my 2000 Gulfstream over the weekend. I bought the blades at NAPA. The part # is 60-2008. They are listed as severe duty truck blades. Perfect match to the original blades.

X2. I did the same.....cost me less than $10 for the blade.

 

[GWL139]

Are these part nos. for complete blades or just the rubber wiper edge insert? Also, are they s/s or regular metal? Thanks for the info.

 

[Finatic]

This is the part # for just the blade refills.