Recent content by Fido

Has anyone had experience with replacing the AC in a 2002-2007 Express 330. Having trouble finding a unit that had the same orientation to utilise the return air. Does anyone have info on what unit is installed in new 330’s? Existing AC is a Marine Air 10BTU

Exactly. It goes against what we all know and have probably learnt from other manufacturers. Our experience with the Marlin and now the 330 confirms that lower is best.

I wish I knew. Having them higher would help with clearing the tips of the gear cases when full of fuel and water. The Marlin didn’t gain any performance with engines higher but the boat didn’t feel as nice coming on plane as with the engines down. Just my feedback anyway.

We repowered an Express 330 with twin Yamaha 300HP DES, helm master etc earlier this year. I studied many express 330’s with regards to engine height. Having had 2 x Marlin 300’s and having played with engine height before from my experience I can attest that Grady’s perform better with the...

Not a Canyon but we have an Express 330 with new Yamaha DES 300’s, Helm Master etc. Cannot be happier with the performance. top speed with full fuel, water and 4 POB is 38-39knots at approx 5600-5700 RPM.

Could anyone direct me to where I would find the Attwood Chrome Plated transom vent found aft of both port and starboard sides of boat? Can find white or black but not chrome.

I have completed this exercise recently on a 330 and added an amp behind the TV. You will find all the access eventually but it’s all right. Message if you need further guidance.

There is a connection plug on the starboard side around where the fuel fillers are under the gunnel. Not the easiest to access. Let me know if you need any more assistance finding it!

This is. PIA job. Unfortunately panels need to come down.

Following this one. Would be great to see any photos/examples

Hi All, Currently repowering a 2002 330 with Yamaha 300HP DES outboards with Level 4 Helm master. And YES…….. I am fully aware of the design and original HP rating. I am located in Australia and the vessel has been re-engineered by a marine surveyor! While boat is out of the water I would like...

Hi All, Can anyone advise if in normal install the port fuel select switch feeds the port motor and starboard vice versa? Never took any notice on previous Marlins but current vessel is supplying opposite. I am going to change regardless but just wanted to find out what factory install was...

I have just completed this exact task with Taco Grand Slam bases and 20 foot carbon fibre poles installed in factory location. I used backing plate underside and fibreglass mounting plate that spanned across hardtop frame. Did this with a previous 2007 Marlin 300 and it was perfect. I can get...

Thanks Fishtales!

Could anyone advise the make/model of the current steering wheel used on a 330. If not perhaps the 3 spoke wheel used for about ten years on GW’s. I would like to replace the existing 5 spoke on our 2002 330. Thanks.