Recent content by grady33

  1. G

    Seacock Remote Operation Arm

    Not sure but bring the old one to the local marine store or contact Groco.
  2. G

    Seacock Remote Operation Arm

    For reference, this is what Grady White Customer Service said to use when replacing valve/seacock etc. They emailed me that picture and that matches what is already in the boat. I know the one on the left is better way to go (or newer way) but the valve in there now was originally installed by...
  3. G

    Seacock Remote Operation Arm

    Just went through this with my pump out valve. Did the exact same thing and ended up just replacing the valve. Put a wrench on thru hull nut and then on on valve and see if you can unscrew valve. If thru hull is in good condition and doesn’t move, you’re probably good just replacing valve...
  4. G

    Vinyl bang cap source

    Yep! Ask for Carolyn.
  5. G

    Vinyl bang cap source

    I called GW and they sent me one at n/c - 06 330 Express.
  6. G

    Exhaust inspection

    This is what corrosion looks like on the powerhead. I was able to have it TIG welded and replaced midsection and oil pump and running great as it always has. Unfortunately you don’t know until you pull the powerhead. Before and after pictures attached.
  7. G

    newbie needs some help with the head on a Freedom 307?

    If you ran the discharge while the valve was closed, you could have reversed the duckbill. I just went through this on my 330. The duckbill was sucked backwards and prevented any pump out while at sea. Replaced it and now works fine. Also May want to check the bellow in case it’s cracked.
  8. G

    330 express stereo install and rear speakers.

    Should be. Easy to check. Small screw thru stainless circle on bottom of bolster. I don’t think I had to widen it but i did above the helm.
  9. G

    330 express stereo install and rear speakers.

    Did it myself. Pulled back fabric removed zillion staples and cut board and re-stapled. Not hard to do! There is a access place behind which I removed and used hole for speakers. Don’t think I had to enlarge it. Did use some gellcoat to clean up screw holes.
  10. G

    330 express stereo install and rear speakers.

    Some pics of my set up. Like I said, Amp is installed behind fridge to the left of it against a wall.
  11. G

    330 express stereo install and rear speakers.

    I replaced with same stereo and ran new heavier gage wires to behind panel and connected it. Put a 6 channel fusion AMP behind the fridge and to the left. Nice fit! Ran heavy gage wire for AMP straight to batteries and added a breaker behind the battery switch box. Added 2 addl speakers to...
  12. G

    General question on drilling through transom

    Yeah I saw that. Just figured I reiterate it in case someone else needs similar help. It’s the resealing part (when needed) that gets overlooked and causes issues down the road.
  13. G

    General question on drilling through transom

    Anytime I drill a hole in the boat, I make it a tiny bit larger and then fill with epoxy and the after it cures come back and drill the hole I wanted down the middle. Help keeps the moisture out!
  14. G

    New GW decals

    Can they do the raised 330 Express hull logo that is midship? I’ve been trying to find someone who can do those raised (like original) and not basic flat lettering.
  15. G

    ‘06 330 Cabin Rope Lighting

    Does anyone know who the manufacturer was or where to get replacement lights? I had port side go out and would like to replace both sides. I like the same warm white color. IMTRA -www.imtra.com has (ILMDL-WW-12LED) 3/8" LED Rope Lighting, 12V Warm White. Looks like it could be same.