Recent content by gulfstream232

I just went thru this for a 2007 232. Broke the original plug. 5/8-11 was the thread after a bit of trial and error. McMaster-Carr black plastic hex plugs was delivered very quickly.

Does anyone know where to get replacement plug? Mine broke while removing it...

Look at the Burnewin mounts, they are super versatile and no extra holes in the body

https://www.thehulltruth.com/boating-how-s-kerno-memorial-forum/485847-replaced-rod-boxes-starboard-tackle-centers.html See above link... Custom starboard is what you need

I have a sinle F350c on GW 232, it's been absolutely perfect thru 800 hours. The fly wheel takes about 30 min for a tech to change and is covered under warranty for the lifetime of the motor. The ECU gives you a prompt when it needs to be changed (every 80 hours in certain RPM range) Mine gets...

I also added these 2 on the port side, can now store 8 rods completely out of the way

This is what I did: https://www.greatgrady.com/threads/gulfstream-232-rod-storage.24556/

I first tried the headliner spray and it wasn't strong enough - ended up using a doublesided gorrilla glue type tape that has held up over a year on a 2007 Gulfstream

Tried to figure out a solution for extra rod storage for awhile. The GW oem rod storage that mounts on the port side cuddy was an option, but a little cost prohibitive. The under side of the fold down bed is a good location for our needs. The mounts we used are these...