Recent content by ocjoy

In the mid 80's the hull desighn was changed to cv2 hull

LMS 350a Great unit as long as you don't need or want color. Had mine for 10 years and a friend is still using it. It was no problem replacing just tied onto the old unit and pulled the wires through the tubing

A used 22' Seafaerer with a swim platform would be a good choice. Depending on the age ( 1996 or older) would be around $20,000. In that age if the boat still has orginal motor it most likely to be a Two stroke engine.

Does anyone have a mastlight for a soft top seafearer Availible. It is the one that has a curve in it. Perko does not have one in their catalog.

anchor light The one I found that was the closest was1274DP2CHR was that the one you got?

Does anyone know the perko replacement part # for the anchor & running light for the Seafarer. It is a window mount. Thanks

I thought that was what bottom paint was for.

Sometimes they are mounted inside the hull. Remove your two deck plates in the rear of the boat and see if you don't have a transducer mounted to the inside of the hull.

I replaced my wood grain along the sides with the stuff they sell at Lowes & Home Depot for porches. It's like a white vinal that they use for Porches or decks. I removed the wood grain and used it as a pattern. It looks like what grady now is using. It was very reasonable to buy.

Memership Username ocjoy First Name Dennis Model 22' seafarer Engine 1998 Yamaha Saltwater Series

My boat is at Harbour Marine right now, but in April thru November it's docked at my home off of 28th st behind Jolley Rodger park. Stop up Oyster Bay and introduce yourself. I usually work on Wed, Thurs, & Friday nights from 200pm until 1000PM

[/img]

I have a 98 seafarer with a 200 yamaha Saltwater series and it runs great fully loaded with 4 people.