Recent content by Off the Hook

i am considering new Garmin Electronics and want to go with thru hull transducer(s). question i have is will i need to put a transducer on each side or on as close to center as possible? anyone have experience with this? thanks

my boat is currently on the rack getting motors serviced, but i will get you pictures as soon as i can...

thanks guys!! i am going to give them a call tomorrow and get this started.

i am in the process of getting quoted for a new enclosure for my 330 express. Has anyone recently replaced theirs? What sort of quotes have you received? I contacted the place in NC where GW has there enclosure work done and spoke with them. They said i can send them my current enclosure and...

Pelagicmagic, While I have not messed with the stereo system in my 33, I did have to replace the rudder indicator on my autopilot. In doing so, I learned GW uses many access panels which are removable. I say this because you mentioned the headliner and I believe the softer part of the...

I have also been contemplating adding a tower to my 33 express. Looking for information about this. How did it change the boats performance? Does the boat roll more with the added weight up there? I would love to have the added visibility while on the troll, but do not want to sacrifice the...

I know this question can be debated,but i as wondering what suggestions you all may have to clean the vinyl... Mine is in pretty good shape, but i am starting to notice small black dots on it that I typically see on the top of the coaming pads that run around the cockpit. I have heard mixed...

dale1, I don't have any actual experience with the satellite weather, but if you are getting into offshore fishing I would say you want an open array radar. Several reasons, if you are heading out or coming back in during the hours of darkness or in weather or fog the radar is going to assist...

Thanks guys. I will try to take a picture of what i had done tomorrow and post it. I am still getting some "flex" on the top, it is very minor, but my goal was to eliminate it all together...

Has anyone mounted a center rigger to their hardtop? If so, where did you mount it and did you add any support? I have recently added a center rigger to my hardtop on a 33 express and had a backing plate made, installed and welded on to the existing pipework, but it is still slightly flexing...

What is the recommended number of hours to replace the impeller?

Fischer, If you are ever in Jacksonville, FL let me know, I would be happy let you take a look at the boat.

That's correct, I have twin 350s. BTW, if I were to go with the 36, I personally think the triple 300s is the way to go...

Fischer, I bought a 2008 33 Express this past summer and came from a 26 center console. My experience with the 33 so far (I have put just over 110 hours on it) is a very favorable one. I have been very impressed with the boat for multiple reasons. When looking, I too, was considering the 36...

From what I understand you will have to go with the 300s. Grady had to beef up the transom in 2008 to be able to support/handle the weight of the 350s. If I am not mistaken the new 300s a actually weigh less than the older 250s so it is not an issue of moving up to the 300s