Search results

Looks like metal that was chrome plated

I need to replace my gas fill on my 1986 offshore 24. I need something that has a 4 inch face. I've only been able to find fills that have a 3 inch face. By face a mean the part that gets screwed to the hull

Do the onyx auto life vests come with the arming kit?

Looking into getting a couple of the following auto inflate life jackets Onyx A/M-24 Automatic/Manual Inflatable PFD Life Jacket Once they deploy do u just throw them away or can u reuse them?

They sent me a rebate form for a 100 bucks

Boemarine had it for 334.00. When i order thru them i get it next day for no extra charge.

Just ordered the 2882

Decided it was time to get a plb. Going with a portable unit. I have it narrowed down to 2 1st one ACR-2882 2nd one ACR-2884 Anyone have any experience with either of them?

I have a 86 grady offshore 24 that doesn't have a shore power panel. The boat has twin outboard engines. We spend a few weekends a year at a marinia in saltwater in a slip. I bought a 30a to 15a adapter with ground fault protection. I just need to plug in the onboard battery charger and...

True i did get a set of marine grade speakers which are suppose to withstand saltwater. Picked up a boss marine audio speakers and boss bluetooth digital media marine gauge receiver and they claim it's all fully marinized

Thats where i was thinking of installing them just wasn't sure about echoing effect. I can always install 2 speakers in the cock pit area if necc

Does it really matter where i install the speakers? I was thinking of installing 2 in the aft section facing the cockpit or should they be placed along the side of the boat?

It will be running this weekend. I wired the remote tank pump to the battery and took 15 min till oil started coming out the hose. I ordered all new deck fills and seals for the remote tank.

Well i finally got the block and heads back from the machine shop. I finally found the cause of my failure. I was in the process of replacing the oil injection hoses and when i pulled them off the pump water came out. Found the pump was full of water. manually operated the pump in the remote...

On my 86 the seacock is 3/4" Also they do make ss seacocks http://www.marinepartdepot.com/stfubava3.html I never heard of not using ss below the water line. Does that also include using ss thru hull fittings that are at the water line?

I know sirius has a marine weather package available. I would assume it updates pretty good

I got new oil injection nozzles for my 87 yamaha 150 2-stroke. Should some type of sealer be applied before pushing them in? I got the nozzles for the intake and the ones that go in the block

I'm keeping the oil injection system. I will verify the output of the oil pump again. When i checked it in the spring it was within spec. The only thing that i found was the low pressure pumps were leaking gas into the vacum ports. So i'm thinking the gas was diluting the oil too much. I'm also...

Well after getting everything disassembled and cleaned it looks like it was more then just a lean condition. Piston from cylinders 1,2,4 and 6 are showing shiny spots on the pistons skirts. The only piston that shows no sign of wear is cylinder #3 which was bored and had the piston replaced. I...

You go here to register a plb www.beaconregistration.noaa.gov