Search results

Grady is now very responsive on this issue. The engineering departmetn callled me directly and we talked at length about the problem. they will be doing an inspection to see if there is any manufacturing defect and regardless they will help me solve the problem. it sounds lilke there is more of...

Guys I really need help on this one. On my 2006 360 express i am having a huge issue with water coming into the cabin and hull from the anchor line locker compartment and I am not sure how to fix it. To explain, i think there is a manufacturing defect on my boat. I removed all of the anchor...

i certainly would not go through the expense of an automatic seacock valve though...

I specifically called Panda on the issue and they said it is not a problem. There are other inconsistencies in the manual too regarding winterization that the factory rep told me was not an issue... in 4 years of running the gennie i have never had any flooding. I dont even check the seacock...

i have had no such problems. Are you running in shallow water? mine is lasting all season (100 hours or so) without a problem. That part is a sacrificial part and they are supposed to be changed often depending on how much sand and other things are running through your lines. I called Panda and...

i use my standard 8 cup filter coffee maker without a problems

if you call Fisher Panda they have a "maintenance" kit with everything in it and several of each...They are very helpful

i have the pump running and water is flowing but still with cold water it does not heat. The water was in the high 40's, nowhere near freezing. In the spring i have no problem with heat. I am not sure if the compressor is kicking in, i will check that next. i guess it goes into reverse cycle and...

Hi everyone it has happened three times now that in days of high seas (6-8 ft), when we take a lot of water over the bow, water comes into the windlass locker and from there it fills up and water comes into the cabin from the locker access panel behind the front berth. this panel is just...

Hi guys i have a 2006 360 express. This winter the water was in the high 40's low 50's and my heat would not come on. it is kinda useless to have a heated cabin that does not get heat when it is cold out :-). the heat works fine in the summer or when the temps are warmer... Any help is appreciated!

I get 0.7 mpg as an average. I rarely get 0.8. May be because of hard bottom paint? it seems that wind/weight/load/trim change fuel usage very little. An adult can sleep in lower dinette very comfortably. when we fish there is one guy up front, one in mid birth and one in the dinette. nobody...

Does anyone have the brand and location of water heater? The manual says port deckwing insert. Is that where the cupholders are on the port side next to the door of the cabin? Thanks in advance

if its breaking all the way across, turn around!

Does anyone know where Grady stores the Lewmar handle on a 360? I have never had to use it in the last 12 months and now I do but I cannot find it. bought the boat used so there is a possibility that is is not there. And what does it look like BTW?

Does anyone know where Grady stores the Lewmar handle on a 360? I have never had to use it in the last 12 months and now I do but I cannot find it. bought the boat used so there is a possibility that is is not there. And what does it look like BTW? Thanks

Amen brother... this spring I almost thought I made a mistake going to a bigger boat (I had a CC prior). there is a LOT of subsystems and they all take some maintenance to keep them running. Living 3 hours away from the boat sometimes I feel overwhelmed with the whole boating experience. I am a...

Those are my exact same experiences with the 360. in Open ocean i have never had the need or ability to go any faster. inshore i never had the willingness to go over 40 gals/hr. I am not sure what the 350's would get me over the 250's exept to spend more on fuell...

I have to replace the 2nd Bank of batteries on a 360. What type of battery should I buy and where? I am not near the boat to check the originals. Thanks!

thanks for the input, my boatyard was right in line. $750 for sanding and painting with MicronCSC Thanks!

hi guys how much should I expect to pay to do a full detail (brightwork, 3 part system wax job and eisenglasss) opn a grady 360? how much should I expect to pay for a bull bottom paint job with light sanding? i am trying to be prepared before i go to the boatyard. Thanks!