Search results

Looking to sell your current boat or find your next one? I'm always willing to discuss the benefits of brokerage and use my resources to find boats for people. Don't waste your time sorting through scammers and tire kickers, let me handle the marketing, advertising, showing, negotiating, and...

I/m pretty sure the armrests are removable on most helm seats. Flip the seats over and there's screws holding the brackets to the seat base.

Hi Clubbies, Has anyone installed themselves or had installed a set of Lee's Jr. wishbone mounts on the cockpit sides of their boat? Specifically, I have a 1999 232G, and would like some advice on install location, angle, hardware, and if any type of poly pad or spacers were used to fill the...

I just outfitted my 1999 232G Gulfstream with a Raymarine a128, CPT120 ducer, and 24mi Quantum radar. Needless to say, it's an awesome setup. I opened up the factory helm pod and did a flush mount for the MFD with starboard, and also had room to mount the Infinity stereo, as well as a USB...

Here's a few pics of my 1999 232G, "Doc's LegaSea". She's powered by a 250 Yamaha OX66, has newly installed Raymarine electronics, and is docked in Somers Point, NJ.

Are these racks still available for purchase? I'd like a set for my '99 232G....

So the NMEA connector would be where exactly on the motor? And I would just route the nmea cable from the motor to the hub at the helm (and into my Lowrance HDS 12?

Can anyone help me out with the Yamaha fuel management system? I upgraded the motor on my '00 232G with an '05 Yamaha F250 4-stroke. I had to buy a new tach to read the updated ECM, but the speedo is the same. Do I need to buy a separate gauge and harness for the fuel management feature, and...

Are these part nos. for complete blades or just the rubber wiper edge insert? Also, are they s/s or regular metal? Thanks for the info.

Hi all, I know there's been posts previously, but does anyone have any current info regarding aftermarket wiper blade insert refills? I have a '00 232G with a pair of 20" blades, and the rubber is shot. Not really looking to replace the complete blade, since the s/s component is fine. I can...

My experience with testing transoms (without drilling and so forth) is to tap the entire area with a rubber mallet. The sound should be a solid "thud" across the entire span. Having a Grady Drive (bracket) will be the safest gamble if you are unsure of the transom issue. Conventional notched...

Joestina, what RPM do you get at WOT? I think mid-5k is where it's supposed to be.

Anyone running a 228G Seafarer (mine is a '94) with a 225 Optimax? I'm repowering mine now, upgrading from a '94 V-200 Merc carb motor. My 17p aluminum prop gave me WOT at 6100 rpm, and the 19p mirage s/s gave me 4900 rpm at WOT. The dealer thinks that the 19p will be perfect when I hang the...

Hey gang, I am repowering my '94 228G Seafarer, and included with the new 225 Opti are the smartcraft gauges. 2 4" gauges will replace the yard-sale of original ones, so to keep the dash looking original, I need to get a blank sheet of Duratrim (about 12" by 18") to mount the new gauges in...