Search results

1 and 2. Only operate Both if you have to in an emergency.

Looks great. Good luck with her.

Likely not unfortunately.

best to take pics. usually there are fastners on the inside frame of the window. maybe share the pics with GW Cust Service for ideas.

Just get a walking foot for your sewing machine. You can do just about anything (fabric, vinyl etc) on a boat with it.

I'd get the same one. Sureflow Blaster2. Sould be plug and play.

those were a custom part made by GW. likely the mold is long gone. you'll have to find someone that can mold plastic to get it fabricated.

I was able to use the back side of the cushion (black fabric with zippers on all but one). Really wasn't that bad of a job.

Take some pics and see if you can find a manufacturers label on the slide and the seat. In addition, start checking the marine websites.

Some pre-launch interior pics. We re-did the cushions and curtains. Not bad for $150 in materials and our labor to cut and sew.

I'm going to guess it is a 15"X8"X 3" or so box. Clearly labeled on the outside. No serviceable parts. You can lose the DSM if you 12V droops. Check your batteries and also if you are running anything at the same time. I can loose mine for a minute or so when using the anchor windlass when...

Agree, just place as far away from the cabin as you can. I see the Honda on a lot of boats these days.

Here is the one on my boat. https://defender.com/en_us/perko-replacement-vented-cap?utm_id=1224856940296832&utm_campaign=590113491&utm_source=bing&utm_medium=paid&utm_content=&msclkid=9a2a60b00a0a16dc148a089120280f2a&utm_term=4580153138713961#615=33881

Get the #14....

Go stainless you cheapskate!! Just kidding. I had a galvy for years. Was trolling the Amazon Warehouse Deals and came upon a SS Delta that was missing original packaging but priced as a quick sale as a galvy. The price was 1/3 the equivalent galvy which was great. When it came it was indeed...

They def sell them. Do some google searching.

Use the hose and blast them out. Then stick your finger in the flap and push it inside the thru hill so your finger can get under it, pull it out and up. The crap usually collects behind the flap. Once you have it cleared, blast it again. Prob a collection of leaves, twigs and other stuff...

Do what you can to minimize weight (fuel, water, waste levels). It's a beast to trailer and in some states you'll need a special permit. The 2' seems about right but should be easy to measure if you have a trailer. Could also shoot GW Cust Service via the web a question. They trailer them to...

I changed my pump last fall. It's just one big radial feed system, each exit point should be independent off the main feed. The pump can be accessed by removing the tackle draw enclosure under the rigging station sink. Plumbing is straightforward (wasn't too impressed to be honest) but a lot...

I think you have to go in with an open mind, inspect thoroughly and ride both in various conditions. A heavy boat is good for sure but don't let the GW bias get in the way.