Search results

Ive had this problem several times. Always ends up being a bilge pump that stays on because something is keeping the float open

soak the rode in downy fabric softener overnight. Its its new its stiff and might have a hard time

We have a 2012 GW 335 Freedom. The boat has two 350s and the transom is rated for 700hp. The newer ones have 3 x 300 and are rated for 900. Either way its a stronger transom which I would prefer. I would imagine in your case the newer Express has a stronger transom and hence the ability to have...

if you are looking to replace - this is the link https://www.scandvik.com/index.cfm?method=products_detail&productID=25

Lewmar Switch-Windlass, CHSX Foot Open Top Black, Model: 68001256 ????

Ah you beat me to it. I have the same problem. Would love to know where to buy them

Same problem here (2012) Grady. They have stopped making this fake wood as it did not work. At one time they would replace free of charge. At this point its best to replace with starboard.

Yea - no worries. We need to have some fun! But your point really was valid as it was not possible to see the back. I am going to follow your recommendations regarding covering the back with poly! Thanks again

Southco M5-7N-61-8 and M5-7P-61-8 are the correct and matching parts in case anyone is wondering.

Hi Dennis - the back has a hole and the magnet is glued in. Its completely rusted and stains hands (and upholstery) - thats why I put it in the ziploc. Surprised that the vendor did not at the very least epoxy the back so that the magnet would not corrode.

Hi Folks, This is for a 2012 337 Freedom which has a fold down table on the rear seat. Magnets are pretty oxidized - not sure if anyone knows who MFG these items? Thanks Alex

Hi Folks, Trying to troubleshoot something...... Maybe this has happened to someone here and they can provide advice. About 6 months ago I was cleaning out the Cedar Lined storage closet in the cabin of our 2012 Freedom, and it was soaked (wet floor and wet cedar wood). I took everything out...

Update - I replaced the switch as it happened again. All good now (except I ordered the wrong color light - now it looks yellow not red - oh well)

That is great advice - thank you!

So the 335 Freedom has a panel switch. Interestingly - after I played with the switch yesterday to confirm it was working (the voltage part), I had to go back to the boat today and check on a radio wire, the lights (and the switch) now work. Huh? Im guessing by taking the connectors off and on...

So to update this - today I put the voltmeter on the switch - there are 13V coming out when turned on and 0 when off. So its not the switch. I think they burned out because the little red light on the switch is also burned out. Im going to check voltage at the spreader lights next (and order a...

OK - thank you for that. The switch does have a circuit breaker next to it (black rubber cap) - and its fine (ie not popped) - will bypass the switch to see if that works

Hi Folks I had a quick question for the braintrust here on how to troubleshoot this. This is for a 2012 Freedom 335. The spreader lights do not come on. The switch on the console when pressed does not have the little red light at the bottom come on (like it does for the bilge pumps for...

So to update this thread - the real product ID is vimar idea 16813. This is the one you need. I had ordered another one and it was too narrow.

Thanks! I am looking but dont see anything similar. Do you have a link?