Search results

reply On my 22-8 the pump/box is located in the starboard side storage compartment in the cuddy. The unit is attached to the bulkhead in the compartment and the lines all run through a hole that I presume was predrilled during manufacturing. On my 20-8 Adventure the pump/box was fitted to the...

reply Thanks for the reply.

I'm flush mounting my electronics and have taken the 1/8" glass material out. Does anyone know the exact name for this glass? I want to use a thicker black (like the OEM) for a backing plate or maybe a white materail used like I've seen in other posts. Thanks, T.R.

reply catch 22 that sounds like a great place, water holding tank is there but seems reasonable. Should I expect to take the floor lid off or access through the round cover (which might be a PIA)?

reply Ok, I checked those areas and all seems good except the compass area. It might be a little to close to the tank, might present a problem for an accurate reading.

I have a simrad Ap14h. Anyone have info on a good place for the pump, course computer, and compass? I know what Simrad tells me but looking for a place on my particular model of Grady. Thanks for a response.

Trailer Caroline boat sales and service in Maryland (near Ridgley). They sell Road King trailers, They sell and size the trailer to your hull were stringers are located. Well built but if you trailer like I don't chince out! (roadkingtrailers.com)

Thanks Thanks guys, took a minute to catch on to the "egg crate foam". How many (rough guess) do you think I'll go through on a 22'. Doing the whole thing. Thanks, TR

Taking some advise on a previous thread. I bought Finesse it II marine polish but need to know what application pad I should use. Thanks, TR

i know this for 4s snowmobiles that dealers say do not run synthetic right off the bat, it prevents the rings from seating. Once synthetic is used oil consumption mayu occur at a minimal rate.

Bought a new (used boat) 228 and it has the full swim platform. I want to install a kicker 9.9 yamaha 4s but the platform is in the way. Do I take off buy new and sell this or have it fabricated? Any suggestions or anyone have experience with having a platform cut?

Thanks guys, how about a store online to order from that isn't an arm and a leg in shipping. I don't live anywhere near a place that sells Colinite Fleetwood wax or Finesse it II, or the 855,920. Looking buy now.

I recently bought a new (used Grady) and the previous name is on the side hull. A look at it with the sun shinning I can see the name (vinyl removed) slightly. What product or application should I use to blend it into the rest of the boat. The rest of the hull only needs a cleaning and...

A bumper with a mountain climbing ring is the cheapest way.

Bob- You summed it up.......I guess I came to the equation my ability an the boats ability however I always wondered if a bracket would help by keeping the weight more centered. Does that make sence? Just curious for my next boat.

Wouldn't bat an eye on the lows hours but..... The hours wouldn't scare me but with my experience with engine hours differing I would be thinking this since I've owned twins: When I troll I switch back and forth between motors to keep the hours in relative time. Sometimes hours such as this...

reply Yes, trim tabs up, speed is enough to stay ahead of the forward moving wave and enough to keep passing the coming forward waves. Wave heights are around 4-5 foot plus waves with maybe 5-10 second passings. I know the quotinent for the calculation under "2" is advisable to stay home...

I know this had been brought up a few times but the bracket question has never been really answered with me so here it goes: I'm in Lake Michigan with tighter/closer wave lengths. I had a '90 25' Sailfish twin 200 yamahas (NO BRACKET) which seemed a little out of control on a forward moving...

Hope you kept the cover off the BW. You could use it on your new GW as a theft deterent. HAHA...

Thanks for the reply, going to a canvas sshop for fitting.