Search results

Repowered my 330 last year with a pair of new Yamaha 300's, for last year, we opted to retain the 17" props from the old 225's. I was able to trial a pair of Yamaha Saltwater Series 2 props in a 15 3/4 x 15 configuration and found significant increases in performance and economy in the mid...

Been thinking about additional rod storage for my 330. As it sits, I have the 6 holders on the tower legs, and 7 holders in the gunnels. I've seen two options discussed here previously - a rocket launcher at the rear of hard top, and adding clamp on holders on the tower legs. One thing I...

Need to install a new sensor at the motors for my autopilot. The existing one looks to go into one of the two rigging tubes in the transom. The autopilot head is behind the gauge bubble at the helm. I have not found a thread on what needs to come apart to access the wiring run. I know...

Free for price of shipping the aluminum panel and guest switches from a 2003 330. Located in Mass.

The linear feedback unit broke Looking for a replacement lf3000 This is for an older Simrad AP22. I’ve also posted on THT but wanted to cast a wider net. New they are 500 and I don’t want to dump that kind of money on a 20 year old auto pilot. Could also be interested in a simrad ap16 or...

Starting to assess what is needed to remove the generator from my 330. Since it is not working, the plan is to break it down into parts and remove piece by piece, until it is gone. Thinking through the connections to the generator and there are 3 systems Fuel. Will cap the fuel line with a...

Considering changing the battery configuration from the stock 330 set up with a 2 bank system. Reason: occasionally lose electronics when restarting an engine while fishing due to voltage drop. I'd like to have the confidence to shut motors off when offshore overnight. Possible...

Have a 2003 330 and the first casualty of the winter storage is the original Kenwood stereo. Looking for recommendation on a replacement. I've done a bunch of searching here, and most of what I've seen are folks looking to go higher end. Primary use would be bluetoothing playlists from...

Looking for rod holders for a truck bed project. Gunwale mounts, need 4-6, preference is 0 or 15 degree, but 30 degree will work.

Down to 3 weeks to go until May 1, the slated splash date. Bouncing off walls here, giddy with anticipation. Have to temper myself by repeating that May weather in New England blows... The first 10-20 hours will be tough to get through - break in period.

There are 3 rod holders in the gunwale on my 330 - the two factory holders, and one spaced halfway between them. Guessing this puts them about 15-18" apart. Want to add a 0* swivel holder, but ideally not in place of what is there already. My gut says that putting it between two of the...

Have a 2003 Express 330 which is going to be repowered this winter. I'd love to go with 300's, but as the hull is technically rated for 500, the dealers I've spoken to are hesitant/won't install those. I know a bunch of others have gone with the 300's on the older hulls, and I'm wondering how...

Anyone planning to attend? We are going to be there Thursday and Friday, hopefully well ahead of Lee. Hoping GW brings something OTHER than the Freedom models.

Looking for a pair of Yamaha fuel flow sensors - model is 6Y5-85752-02-00. For Yamaha F225's. I could buy new, but figured someone might have a pair of them lying around.

Any members down in the Melbourne / Canaveral area? Have some general questions on fishing in that area - possible for me to work remotely there for a couple of weeks and wondering about fishing options / time of year etc. PM is ok.

On my 330, there is a suite of Raymarine instruments. One of the components was a DSM 300 which has been replaced with a CP 370 for driving the transducer. The wiring for the prior system had all the other components wired to the fuse panel, except for the DSM 300, which was wired to the end...

Over the winter, I purchased a set of Raymarine e127 MFD's from a member here. This post will document the process of removing the old units and replacing with the e127's. The former units were a Raymarine C140w and a Furuno L182 Fishfinder. The first step was to remove the helm pod from...

Just had my reminder from a West Marine email that I need to replace the dock lines for my 330 this winter - where is the preferred vendor for these? Planning on braided lines, 5/8". Thanks

Looking for a way to add some holders to store Harpoons and Gaffs out of the way on top of the hardtop on my 330. Anyone have any solutions they are happy with? I'd like something which will handle them even running in seas. I have Lee Sr Outriggers which have a connection on the hard top...

Acquired a dog last year, he is approximately 80lbs and this will be our first summer with him. No issues where we are slipped, but we often will overnight at Cuttyhunk island which does not have floating docks. Wondering what options are for getting the dog on and off the boat. Boat is a...