Search results

  1. Angler Management

    Cockpit Scupper Access

    Good luck, Fishtales. Several of us are hoping you have great success with minimal issue. You mentioned a tool that enables the SS tops to be tightened easily into the nylon housing... care to share what this is? RC
  2. Angler Management

    Boat camping (sleeping on board) with a CPAP machine

    Buddy used a simple cigarette lighter inverter last spring for 5 nights. Worked great, minimal drain on my house bank. Ran the boat every day and only used shore power 1 night. Alternately the portable battery systems by Jackery, Ecoflow, etc... are good, but heavy and spendy. But a good...
  3. Angler Management

    Replacement Screen

    Mine are imbedded in a rubber gasket with plastic flange that fits the outside of the window. Although your suggestion may have merit... the windows he talks about open inward so velcro inside doesn't help.
  4. Angler Management

    MFD's

    I like two at the helm and one at the transom for salmon fishing so my crew always knows where the bottom is when using downriggers. Keep the transom MFD always on a sounder and keep one of the two helm screens on the sounder. I can setup the second helm screen as needed. It's also nice to...
  5. Angler Management

    Cockpit Scupper Access

    Following. I need to do this, and thinking of replacing the hoses at the same time. It appears both are really difficult to access, especially Port where the hose goes through a bulkhead into a foam filled compartment. Ugggh.
  6. Angler Management

    Diesel furnace

    OK I'm for sure doing this project this winter. Thinking the main unit will be installed behind the port panel in the mid berth and take advantage of the existing ducting to the cabin from my current heater/AC unit. Thanks for the model of your Webasto, Talewind. I found an installer who...
  7. Angler Management

    Repower Or Move On 306 GW

    Just repowered with new 300 Verados. I wouldn't discount buying new... warranty, technology, etc. has been WORTH IT on my boat this past summer. Keep us posted! and X2 on checking transom at this time.
  8. Angler Management

    Diesel furnace

    Did you ever get an answer to this question? I’m thinking of this as a winter project.
  9. Angler Management

    ProMariner died 300 Marlin

    I suppose there's a lawyer at ProMariner and after one meeting he said "Only tell the client what you can prove". So they told me the recommended specs and not a word more. I can argue about how batteries are "seen" from the outside, but I can't argue about what software ProMariner is using to...
  10. Angler Management

    ProMariner died 300 Marlin

    OK I spoke to ProMariner. Here's there answer, summarized by me, not quoted, I"m just using quotes to generalize what they said. "The ProMariner chargers have computerization that works for Group 24, 27 and 31 batteries. By connecting two Group 31 batteries in parallel you no longer have a...
  11. Angler Management

    ProMariner died 300 Marlin

    That's been my setup for a while now. Three leads. But manual and "others" say no. It is probably fine. Just looking for answers. Thanks!
  12. Angler Management

    ProMariner died 300 Marlin

    Thank you, good tips. Correct, VSR's from each start battery to the house bank. True is the MFG and opens at 13.4V closes at 12.9V All four batteries are deep cycle, two GRP 24 for starters and 2 GRP 31 house. I don't have the CCA data handy but it seems to work ok. Regardless it sounds like...
  13. Angler Management

    ProMariner died 300 Marlin

    I suppose I could use a 2 bank charger with leads to the two start batteries... because charge in excess of 13.2V goes to the house bank? My gut says there's something wrong with this, however... please advise.
  14. Angler Management

    ProMariner died 300 Marlin

    I see the ProMariner 3 bank is $170 and the ProMariner 4 bank is of course $500... :/ I suppose amortizing it out over the 15 year lifespan isn't that big a deal, especially for such a critical piece of equipment. Anyone have good experience with other brands? Recommendations?
  15. Angler Management

    ProMariner died 300 Marlin

    This is why I ask these questions...! Now that you mention it I do recall this tip being brought up in the past. Thank you so much!
  16. Angler Management

    ProMariner died 300 Marlin

    2007 GW Marlin looks like the ProMariner charger is dead. I have my batteries set up this way: 1 starting battery for each engine, isolated from two batteries that are my "house bank" that are charged by any excess voltage from the starters. So functionally three batteries. It has worked...
  17. Angler Management

    Mounting Canister Life Raft on Older Grady T-top

    I'd think it would be fine. I've talked to a few surveyors who feel the support "cage" and hard top are very well made. Try to use a broad backing plate for pressure distribution. Other than possibly being unsightly I see no structural reason it wouldn't work.
  18. Angler Management

    raymarine quantum chirp

    I have one. Purchased in 2016. Crapped out just prior to the warranty falling off. Raymarine sent me a new one quickly and it has been fine ever since. I like it.
  19. Angler Management

    Replacing generator with inverter on 330 Express

    Also, may I recommend small stove and french press for coffee... better than coffeemaker!
  20. Angler Management

    Replacing generator with inverter on 330 Express

    I'm doing this too this winter or spring. Considering adding a diesel furnace for use with the diesel tank for the now trashed genny.