Search results

Does anyone happen to know what length throttle and shift cables are used on a 2000 226? I am looking to repower with a Suzuki DF250 and I am trying to round up some of the rigging components. I am not at the boat to be able to try to figure it out. Thanks.

Are there any problems with testing compression with the engine tilted up. I thought I would do it with the boat in the water. Easier to get to the cylinders this way.

Is anybody running a 248 / 258 with a single 300? I would be interested in knowing how the performance is. I had a 248 with twin 150 2-stroke and thought the performance was quite good. Just curious how a single 300 might stack up against that.

I have been trying to come up with a ladder design for my trailer to make solo launching easier. I came up with using aluminum angle to have a simple but sturdy design. Before After

I have a 2000 226. Where would the fluid reservoir probably be located? Thanks.

I have a 2000 GW 226 with a 2000 Yamaha 200 ox66. Does any one know what model cylinder # I am likely to have ? Thanks.

For those of you that might have an issue with your Yamaha gauges like I had ( dim lettering and sun crazed faces) there is a cure. I sent mine too Gauge Saver in Florida. They sent this picture of the before and after. The result is pretty dramatic. I don't have any connection to them. I just...

I have a 2000 226 and I am thinking of replacing or refurbishing the switch panel. Does anyone know the dimensions of the panel or have access to their boat to measure it. I am not where the boat is and would like to start to plan how I will get started. Thanks.

Has anyone had to replace the under seat drawer used on a number of different models. I need one for a 2000 226. Where did you find it if you had to replace? Thanks

Has anyone searched for and found the U-shaped tension bolt for the Pompanette seats? The one I have is frozen on and will not turn. I expect it to break when i force it. Thanks.

Has anyone replaced their aluminum tank with a plastic one like the ones made by Moeller?

I just acquired a 99 248. The gas strut for the hatch cover above the battery compartment (rear seat) is missing. Does anyone have info on what I need to find a replacement? Thanks

I was surfing around on Craigslist and found these. Thought someone here might have a need. https://miami.craigslist.org/pbc/bpo/d/jupiter-grady-white-switch-breaker-panel/6838533697.html https://miami.craigslist.org/pbc/bpo/d/jupiter-grady-white-switch-breaker-panel/6838533697.html

Any thoughts on the best way to patch these cracks or is it necessary? Thanks.

Well I couldn't help myself. Too old for such things but I did it anyway. Really excited about what adventures may come. 1999 GW 248 voyager with twin Yamaha 150's.

Has anyone tried to replace the GW McGill switches with Carling switches in the same panel? Thanks.

Is it possible to separate the rear section from the main section of the Yamaha cowling pictured? I want to remove and repaint the peeling section. Thanks.

On Yamaha gauges for a 1999 ox66, do they go to 999 hours and then roll over to 0? I did not think that was correct but someone told me that. Thanks.

I have a 1999 GW 223 with a 1999 Yamaha 200 OX66 that I possibly would swap to a 2006 F250. It appears that there is about 100 lbs difference in the weight. How big a factor will that be in how the boat sits in the water and performs? Would it be enough of a problem that I wouldn't want to make...

I finally got the electronics panel mounted in The GW 223. All I have left is to install the transducer and hook it up. I will be able to do that this weekend when I put it on the trailer. Also installed a completely new brake system on the trailer. I need to bleed it in the next day or two...