Search results

CRC Where can I find CRC products?

I picked up the Raycor filter and bowl today Filter 29.95 Bowl 39.95 Only have to buy once unless somethng happens to it. Thanks for the help. I will be able to monitor the fuel quality with this upgrade. Tight Lines!

I went to the GRADY dealership in my area today to get new filter. He is all out, What a surprize. I did talk with them about the conversion to the Yamaha 10 micron with the bowl. He had the Racor with the bowl but said I should wait for the Yamaha's to come in. They are $15, the Racors are $27...

Thanks for the advice guys. I'll give it a shot this week! Almost time to go in!

Yes, it is mounted high in the port rear comparment. I am asking just so I wil know what to be prepared for. I am sure this can be dangerous if not done properly. Do you change your filters before you run your motors for the first time of the year or do you run them for a while and wait until...

Thanks BobP, will the fuel from the tank continue to drain out of the supply line to the filter until I get the new filter on?

I have never changed a fuel water seperator. Can someone give me some tips on this? Yamaha blue quart size. Do I have to clamp the fuel line going into the filter before I remove the filter? Any info will be helpful. Thanks

fishgo208 Jay 1998 208 Adventure 1998 175 Yamaha

Does anyone know if the console from a 2001 208 Adventure will fit a 1998? I like the larger opening in the electronics box and the square top. Any ideas?

I will have 10X12s on my 208 this year. Catch22 mentioned to large could be dangerous in certian situations. Can they give you a problem in a following sea?? Could anyone say what to be careful of? Average Joe, how did you like your new ones last year?

You may have a problem with the unit or antenna itself if It will not pick up the satallites and lock on to them. you should have no problem with this if you have it in a stable location with nothing overhead. You did not mention what kind of unit this is or antenna. I would suggest you call the...

Thanks Guys, Eric, did you mount the pump in the V berth? Are the ones you have 12" out and 9" across the hinge? Thank's for posting the pic!

Thanks for the suggestion of looking into bennetts, I ordered the Lencos due to the ease of installation and low maintenance. I trailer my boat. It is not in the water all the time. Again I will see if If I can find some comparisons Lenco vs Bennett. Not sure if I am locked into this yet I will...

Just curious why you are looking to repower? I have the same set up and fish offshore often. Great performance from this engine. Have you had problems?

I ordered Lenco 9X12 standard mount Trim Tabs. Just got them and I think I made a mistake. The instructions say I need 15" to mount them. I have a 208 with swim step. and only have 12"! I will have to return them. It looks like I can only put 12X12 or 12X9 (EDGE MOUNT) the first number being the...

Mike, check your PMs

Just my 2 cents; Very seldom do I see fish arches. everything has to be perfect for this to happen. Boat speed, fish speed and directon of travel, sonar settings, number of vertical pixels at a given depth, if you are in shallow water or deep water, using zoom, zoom helps because you are...

How about a Tuna?

NICE LOBSTA, Where are the claws??? They are the best part! Are the pics in my post still to big? It looks to me they are in frame now. Jay

1998 208 Adventure, 1998, 175 Yamaha Saltwater Series