Search results

anyone know a site that has grady white decal for the rear window

buster blue is that for the sliding glass windows they are the ones that leak but none the less i bet thats where the screws are under that gasket

great thanks for the tips, i called grady and they set me up with a guy in Florida named george who is sending me replacement gaskets and step by step instructions on how to replace the gasket. very helpful thanks again guys

what are my options it's a 1990 sailfish and the cabin windows leak through the the gasket. they are just dry rotted and need to be replaced. some suggestion would be great

it's maybe at most an inch gap. trust me you cant get to them it's totally nuts

never i love the boat it's a bit bumpy at times. it's a mean fishing vessel

ok i wasn't quite sure which one it was i heard different that it was and wasn't.

any other ideas the ones mid ship you can't get to. it's driving me nuts i need to seal these i even loaded up caulk top side but i would like to do the job correctly it's the only place that lets in rain water.

no luck at all i cant get to them

what hull does the 1990 sailfish have?

i have a 1990 with 2001 mercs not optimax i get around 1.3 mpg full load full tank, ice,gear,bait, 4guys etc. it can pound in a head sea tons of cockpit space. check for rot in the stringers and at the helm bulkhead i had a bit but replaced it. also change the plastic through hulls to...

looks real nice make sure you check the deviation on the compass now that the unit is mounted so close to it. it sucks when your compass is 5 0r 10 deg off

gradyfish22 that is exactly what the problem is everything you said with water coming in they need to be re caulked

how do you get to the nuts that hold the rail in place to tighten them pretty tricky huh

i loved that unit on the old boat. i always thought the toggle switch the frequency from 50 to 200 i know when my wiring went bad i took the toggle out wired straight to the unit which left it in what i thought was 200.. oh yeah i had a transom mount transducer

called my mechanic today he says the older engines carbs have aluminum floats. the new engines have plastic. what it is, that the ethonal i the gas evaporates at a faster rate because the metal retains the heat so they stay hotter causing the engines to be primed again. this only occurs if...

it's really tough to get the zippers unstuck your best bet is to use a pair of dykes and bend the zipper stopper off. the little metal things under the zipper then replace them. if you break a few teeth just crimp it above that spot. i had to put a screw driver on the zippers and hit them...

i have a sailfish with twin 200 2001 mercurys saltwaters carb engines. engines start fine the first time but after they run they don't want to start. there are two ways i get them to fire. 1st is a fast start throttles engaged then i pump them with long turn of key. or i just do a long turn...

i have a power cable that is brand new i will get rid of.

http://www.basspro.com/webapp/wcs/store ... 00_200-4-9