Search results

  1. bartoma

    Bomar Hatch on 265 Express...

    Seeing a little moisture on the bunk under the hatch... Before I think about anything dramatic, I thought I would replace the hatch seal... Does anyone know the correct gasket material for the Bomar hatch for a 2001 265 Express?
  2. bartoma

    Cockpit drains...

    I have about decided that I don't want to mess with the ones that are already there - they are old and the bar spanning the opening is broken on 2 out of 4, but I just don't feel like trying to fool with them and the drain tubes... Has anyone identified a good stainless screen or grate that one...
  3. bartoma

    265 express gauge panel...

    Thanks for the suggestions... Actually, I am adding a couple temp gauges to the existing panel right now... They fit, but barely, and I really didn't do a bang-up job on locating the holes... It'll work for now, but when I have some time, I think I'll ab a new one with the carbon fiber...
  4. bartoma

    265 express gauge panel...

    I am thinking about replacing my old, faded gauge panel (aluminum with carbon fiber look) with something new... Has anyone already had one fabricated do I can just order a copy from the shop?
  5. bartoma

    Adding a divider to my 265 Express Fishbox...

    It has worked very well... I ditched the portable cooler to free up the cockpit, and I usually just put 40 lbs of ice in the aft portion while storing fenders forward of the divider... If I am not bringing Ice, I can use the whole space for storage, using the fridge to keep drinks cold...
  6. bartoma

    265 Deck Drain Replacement...

    Mine are old, and the white bar inside one just broke off (and the others are not far behind)... Are these hard to replace? Accessible with the rear panel removed? I think I looked at this some time ago, and I remember it was daunting, or else I would have changed them then... Anyone done...
  7. bartoma

    Need fridge recommendations

    I replaced a DC440 with an Isotherm CR 49 AC/DC... Easy job...
  8. bartoma

    Replacing primer bulb/fuel line for Z200s...

    Thanks, you all... I don't recall seeing the oetiker clamps, though I do have the tool for crimping... So, I think I am GTG with getting some line and maybe a new bulb for the the one I didn't replace... Thanks for the feedback...
  9. bartoma

    Replacing primer bulb/fuel line for Z200s...

    This thing: Is this fitting used on either side, or do I cut them off? Engine side, yes - boat side? I am guessing also yes, but just wanted to know for sure... Easier for me to ask here than drive an hour to figure it out myself... :) If I remember right, my lines are clamped onto the bulb...
  10. bartoma

    Replacing primer bulb/fuel line for Z200s...

    I want to replace the primer bulb and fuel line assemblies on my 265 express... Can someone confirm how these connect? I think it's just a hose couple on the engine, but what does it connect to on the boat side? The fuel filter bracket? Does it use the fitting that comes with these...
  11. bartoma

    Headliner Cracks

    Yep
  12. bartoma

    G/W 330 Express

    My 265 was 12 years old when I bought it, so been there... First and foremost, get a high quality survey done... Make sure they are thorough in inspecting thru hulls and transom for water intrusion... Check the tanks for leaks, condition of hoses, yada... Obviously, check the engine...
  13. bartoma

    Headliner Cracks

    True dat...
  14. bartoma

    Headliner Cracks

    I called GW this afternoon, and was directed to Carolyn Ray, who was very helpful... She asked that I take some pictures, and we could discuss a course of action... As alluded to by others, they have a team of specialists that travel to do this repair, and the cost depends on the extent of the...
  15. bartoma

    Headliner Cracks

    I have several significant cracks in my headliner on my 2001 265... I am the second owner... Is there any point in contacting GW about this? What's the best course of action under these circumstances? Anybody done a repair themselves?
  16. bartoma

    Twin Z200 HPDI Mystery Filters...

    Yea, my mechanic friend was pretty insistent that we change them... Mechanic's best practices, he says - never reuse O-rings, seals, and gaskets... No, I ordered 14 packing kits (gulp) and two O-rings from Crowley... This was what my fiend thinks we need, so if were short on the first one, we...
  17. bartoma

    Transom drain tubes

    They are 1.25" diameter... I found some on Amazon from Marine City that are 4" long - most others were 3"... I needed the longer ones because the two holes I am redoing are about 3.25" deep... Looked like T-H Marine has an alternative, as does Gem... These are plastic tubes with connectors...
  18. bartoma

    Twin Z200 HPDI Mystery Filters...

    I changed out all of the basket filters in the injectors; now eyeing up the pair in each fuel pump... Do I need to reflexively replace the O-rings on the fuel lines (and elsewhere, if any)? Seem like most people who have done this just coat the existing ones with 2 stroke oil... I did replace...
  19. bartoma

    Transom drain tubes

    After worrying about this, I had a knowledgeable inspector come by and take a look... After going over it with a moisture meter and some light tapping, he confirmed that the hull is "bone dry" - much to my great relief...
  20. bartoma

    Beckson Deck Plate Color...

    What do you think about Armstrong for the splashwell and Beckson screw-in for deck?