Search results

  1. M

    Finally!!

    Now it's like it should have come out of Greenville..............So tidy!
  2. M

    2009 257 Advance for sale twin Yamaha 150

    Oh, if it weren't for the bottom paint..........Nice sled - GLWS
  3. M

    Rope Splicing

    https://www.animatedknots.com/eye-splice-knot Have a look.......I know you can do it!
  4. M

    Power tilt and trim needed

    Easy fixes are the ones we like. Good for you. Thx for closing the loop
  5. M

    Power tilt and trim needed

    With a stripped out gland this could be a tough fix. Easy enough to re-pack the seals. Did mine in an afternoon.
  6. M

    2001 Advance 247 Non Striped

    Looks great . Where'd you get the new Grady decal?
  7. M

    Added a second spare

    You're proactive that way! Better prepared than not. Saw the coolest thing today at the beach on a new trailer.......The hub and spare were mounted integrated.......slick as can be.
  8. M

    Cost for thorough cleaning and ceramic coating interior/exterior 1988 22' Seafarer Cuddy Cabin

    I did mine myself this past spring. Spoke with Drake of Drake's Detailing in Fl, also YouTube fame. Great guy, led me in the right direction, great product advice and most of all I pocketed enough for a new MFD display. Also did my upholstery too - nothing like a "new" boat! Worth saying is...
  9. M

    Wanted: Seafarer 228 in SoCal

    I pull my 2003 - 222 with my F450. All in it's maybe 7k lbs, the truck itself scales out at close to 10k lbs and no trailer brakes. Loaded gooseneck trailer for work I hit the scale at close to 24k lbs. Of course the gooseneck has brakes on all 4 wheels. Worth noting is that I have about...
  10. M

    Fischer panda problem

    Sometimes, not always, the fuel shutoff solenoid will cause you a headache. I've had a Grasshopper with a Kubota diesel in it and it's shutoff solenoid had a mind of it's own. It was and older machine and I suspect it was a grounding or wiring issue in the switch. It's gone now and I'm glad.
  11. M

    The Official KY Smoky Keys Thread

    There has to be such a satisfying feeling to get that pristine boat so bloody! Well done and thx so much for sharing. Stay safe and enjoy
  12. M

    Where to get striping - ‘06 330

    I think I've got a small length of that.........How much are you needing?
  13. M

    2021 Hull Logo's and model callout

    Well done sir, well done.
  14. M

    Rigging tube project today

    That's "tight". Nicely done!
  15. M

    I'm back - sorry to be absent

    I can feel your pain. Was there last June, same emergency type thing. Get well soon and I wish you a speedy recovery
  16. M

    Squeaky steering wheel

    I removed the wheel when I couldn’t take it any more. The squeak was like fingernails on the chaulk board and when idling or even trolling it was maddening. I used a small Dremel tool with a burr bit and ground off some of the plastic facia piece.
  17. M

    Posting of my Grady 330 transom cap replacement, shims, transom drains, scuppers

    Nice write up and attached pictures. Will help me immensely.
  18. M

    Check you PM's......

    Check you PM's......
  19. M

    Trailering - motors up or down?

    Good info in here Nice tow vehicle wrxhoon....
  20. M

    boat lift bunk separation specs for 208 Adventure

    222 here and 30" bunks on lift