Search results

I have a 96 bought it 2008 with a pair of Ocean Pro 200's - replaced them with a pair of 2010 Etec 225's .I looked at Merc, Yamaha and the Etecs - very happy with my choice runnng 1.5 + MPG most of the time. Top speed is 53 MPH with a moderate load . They are very effecient at a idle less than...

photo 2

While not a 282 here are photos of my Big Jon's on my 272. Front one are gimbal mounted rear's are direct bolted thru with a aluminum backer plate. Rigger are the captains pack . Chris

I pull the same boat with a Chev 2550 HD with the Duramax without much issue, but I dont think I would want anything lighter. As a FYI I did upgraded my hitch as the OEM hitch from Chevy was not much. SBLGFD

I have the same concern - I changed the port sides and would now like to replace the starboard ones - but short of curtting and access plate in I cant see any good way to get there .

Just ordered a pair of LED spreader lights (www.coastalnightlights.com/) and would like to consider pulling all new wire to feed them as opposed to a splice. Anyone ever try and pull new wires through the hard top tubes? Suggestions and or ideas? Boat is a 1996 Sailfish 272 Thanks Chris

Not quite the same situation but I repowered my 96 – 272 Sailfish with a pair of 2010 225’s and could not be happier with them. Dealer is another issue so spend some time and ask lots of questions, but the Etec’s are great.

I did additional comparison shopping - the prices posted are the lowest I could find for the specific brand within a reasonable distance (300 miles). Got a total of three Etec , Two Yamaha and two Merc prices . Two of the BRP prices came from fairly large dealers - they say rated #5 and #6 in...

Went thru the same thing - went with Etecs- if you decide not to repower I have a good running 96 Ocenan Pro 200 with a newly rebuilt ( June of this year) lower unit as wellas a spare for parts . Running engine is standard rotation, parts unit is counter rotation. I will make you a deal on the...

As a FYI and in the interest of a informed discussion here are my prices - all were for the same amount of work. I removed my old engines, rigging, wires and gauges. New units included dual control binnacle and all new digital gauge package, Etec dealer in the end also threw in a spare set of...

I will chime in here. We just got our 96 Grady 272 back with a pair of 2010 225 HP Etec’s and could not be happier. Clean, quiet and more efficient than the old Ocean Pro’s During the process of the repowering we looked at Mercury Opti-max , Yamaha 4 strokes, Yamaha 2 strokes and the Etecs...

Looked at both . If I stay with a Etec I can use my existing gauges and controls. Also I have been told my bolt holes wil line up. Spoke with Grady and they said typacally a 4 stroke will require the scuppers to be moved up due to the weight. Not really wanting to do any fiberglass work. SBLGFD

Wondering if anyone has repowered there sailfish with Etecs and what the results were. I have a 96 272 and we are now considering a pair of 225 Etecs. Thoughts? Thanks SBLGFD

Any intrest out there in a Lake Michigan Club, I live in Northern Door County and their are at least 10 within 20 miles of me. SBLGFD

Looking for a reputable place to purchase a lower gear case for a 1996 200 Ocean Pro, hopefully at a reasonable price. Any suggestions? Thanks Chris SBLGFD

I have a 96 272 Sailfish and am looking to install at least two of the following Raymarine displays L1250 / L1260 / R80CRC. I was up to the boat today sizing it up and those displays sure look big to try and do any sort of nice flush mount setup. Any advice- I have the L1250 and L1260 and am...

Joe, Agree on the wire issue and that hinging it would make a mess. I think I am at something over 12' now and the dome will be bumping against 13 feet. I only have one route to the ramp luckily its only about 2 miles - might need to do some midnight tree trimming. You ever come up to Door...

Looking into options for mounting a radar dome on my 96 272 sailfish. I recently acquired a 4KW Raytheon unit in like new shape and am planning on making it the spring project. The issue I have is that I trailer in and out to the ramp on a several time per week bases. I think the radar dome is...

I tow our 272 on a tri-axle bunk trailer with a 2007 2500 HD Duramax with no issues. Bought the boat in Charleston S.C towed it to Florida for spring break with the kids and then back to Wisconsin. The one thing we did do is replace the OEM hitch with a Putnam receiver. If I remember the Chevy...

I had a similar issue in my 96 Sail Fish – Bought it last spring and during the summer while trolling my voltage would start to tank – sometime below 10 volts showing on the Fish finder causing malfunctions of the electronics – if I would run both engines I could get my voltage back. Never...